INDEX DE MACHINES

Eck bus-pro

Station super automatique pour la récupération, recyclage, et recharge du réfrigérant R134a, dans les BUS et véhicules industriels.

Type de réfrigérant R134a
Procédure Entièrement automatique ou manuelle
Alimentation 220-240V 50/60 Hz
Résolution balance 10 gr
Résolution balance huile 5 gr
Temp. fonctionnement 11/49°C
Filtration 2 filtres pour l’humidité
Pompe à vide Capacité 170 L/min degré de vide 0,1 mbar
Compresseur hermétique 21 cc, haute pression
Pompe à engrenages débit 1 kg/min
Bouteille réfrigérant 40 litres, rechargeable
Flexibles HP/LP 6 mètres
Dimensions/Poids cm 80x120x115 kg.127
Dimensions/Poids emballage cm 91x72x126 kg.137
Imprimante thermique De série
Ecran LCD
Flexibles Classe1

Détection automatique de fuite

La station vérifie les pressions pendant la phase de vide. Si une fuite est détectée, le cycle est interrompu, et une alarme se déclenche.

Décharge automatique (brevet en instance)

Des gaz non condensables en fonction de la température et des capteurs de pressions.

CARACTERISTIQUES STANDARDS

Pompe à engrenage Pour le remplissage du réfrigérant.

Nitro Chercheur de fuite intégré à l’azote et à l’azote + Hydrogène avec une connexion à une bombonne externe.

Prise USB pour software et Data Base

ECK BUS-PRO ECOTECHNICS FOR R134a

Ecotechnics special product for the refrigerant R134a.
The performance parameters of the ECK BUS-PRO follow increased capacities, which are necessary for use on buses and trains.

ECK-BUS-PRO – Fully automatic A/C service station for recovery, recycling and recharging with the refrigerant R134a on very large A/C systems, such as those installed in buses and trains. The high refrigerant recovery rate of more than 95% ensures today’s undeletable contribution to environmental protection. The service valves are operated manually.

ECK-BUS-PRO – The patented and compact aluminium recovery unit is a great advantage. During the recovery phase, a lot of heat is generated and the refrigerant is cleaned of mechanical residues, oil, acid and water and stored in the internal tank. The patented recovery unit shortens internal lines and paths, increasing efficiency and reliability. Even at high outside temperatures and very strong use, the operating speed does not decrease during the recovery phase. A/C service stations from Ecotechnics work at outside temperatures from +11 °C to + 49 °C degrees.

ECK-BUS-PRO – The special refrigerant high- pressure gear pump and the very large refrigerant storage tank, make working on very large A/C systems with its correspondingly high refrigerant quantities easy and fast.

ECK-BUS-PRO – Easy to use. The alphanumerical display guides the operator through the logical and professional menu navigation. The data input is made on a separate keypad with additional function buttons. The menu navigation is Ecotechnics-like and guides even inexperienced operators safely through the A/C service.

ECK-BUS-PRO – The pressure test with forming gas or nitrogen provides optimum security and is factory standard. The test gas is fed into the machine via a connection with a maximum pressure of 15 bar. Via a menu item in the software, the operator can check the vehicle A/C system in overpressure. The holding time and the threshold value for the pressure loss test are specified by the operator in the settings. After the check, the logging takes place and a report is printed out.

ECK-BUS-PRO – Practical and fast! The menu- driven service hose length is compensated by running A/C system after recharging and the A/C pressure test. The pressure sensors can be easily calibrated. The discharge of the « non- condensable » gases from the internal tank takes place automatically. Thermal printer, static diagnostics, as well as strong and professionally designed components, create this high-end special A/C service station.

ECK-BUS-PRO – The A/C system pressure test can be worked out very quickly by the manual service valves and helps to measure up the A/C system.

ECK-BUS-PRO – The workshop-oriented design is user-friendly, space-saving, enables agile moving in the workshop and makes maintenance work on the machine very easy. The high-quality materials make the machine resistant to kicks and strikes.